Sichuan Xinheng Magnetic Materials Co., Ltd
SICHUAN XINHENG MAGNETIC MATERIALS CO., LTD
Add to Cart
Permanent Magnet Ferrite Used In Advanced Automotive Steering Systems Car Ferrite Magnets
What's the key advantages of ceramic strontium ferrite magnets made by wet compression molding?
Low cost - Strontium ferrite is inexpensive and the wet molding process is relatively simple. This makes them cheaper than rare-earth magnets.
High magnetic property-Even without heavy rare earth element additions, strontium ferrite magnets can achieve coercivities of 700-1000 kA/m, making them suitable for many applications.
Dimensional consistency - The compression molding process allows for close dimensional tolerances and uniform magnet shapes to be produced consistently.
Temperature stability - Strontium ferrite magnets have high Curie temperatures, typically around 450-470°C. They maintain good magnetic properties over a wide operating temperature range.
Resistance to corrosion - Being fully dense ceramic materials, they are not prone to corrosion like bonded magnets containing additives
Application in electric power steering (EPS) system:
In electric power steering systems, the magnetic properties of permanent magnet ferrite are widely used in the design of motors and sensors:
Motor design: Permanent magnet motor is often used in electric power steering system, permanent magnet ferrite as the permanent magnet of the motor, which can provide continuous magnetic field, thereby improving the efficiency and response speed of the motor. Compared with traditional motors, permanent magnet motors have higher power density and can achieve greater output power in a smaller volume.
Sensor application: In the steering system, the accurate detection of Angle, torque and other parameters is very important. The permanent magnet ferrite can be used in conjunction with the Hall effect sensor to accurately feedback the steering state through its magnetic field changes to ensure the safety and handling sense of the vehicle.
PHYSICAL PROPERTIES OF SINTERED FERRITE MAGNETS
| Units | Sintered Ferrite (Ceramic) | |
| Curie Temperature | ºC | 450 |
| Maximum Operating Temperature | ºC | 350 |
| Hardness | Hv | >530 |
| Density | g/cm3 | 4.8 – 5.0 |
| Relative recoil permeability | μrec | 1.05-1.1 |
| Temperature Coefficient Br | %/ºC | -0.18 |
| Temperature Coefficient iHc | %/ºC | 0.11-0.40 |
| Anti-Bending Strength | N/m2 | (0.5-0.9)×108 |
| Anti-Compressive Strength | N/m2 | ≥6.9×108 |
| Anti-Tensile Strength | N/m2 | (0.2-0.5)×108 |
| Specific Heat | J/kg·K | 600-900 |
| Resistivity | Q.cm | >104 |
What's the application of Xinheng's permanent ferrite magnets?
Xinheng mainly manufactures the following types of ceramic arc segment magnets:
How Xinheng fabricates its permanent strontium ferrite magnet?
FERRITE POWDER GRADE OF MOTORCYCLE MOTORS MAGNET
| 牌号 Grade | Br(mT) | Hcb(KA/m) | Hcj(KA/m) | (BH)max(KJ/m3) | ||||
| mT | Gs | KA/m | Oe | KA/m | Oe | KJ/m3 | MGOe | |
| Y33 | 410-430 | 4100-4300 | 220-250 | 2760-3140 | 225-255 | 2830-3200 | 31.5-35.0 | 3.9-4.4 |
| Y33H | 410-430 | 4100-4300 | 250-270 | 3140-3390 | 250-275 | 3140-3450 | 31.5-35.0 | 3.9-4.4 |
| Y33H-2 | 410-430 | 4100-4300 | 285-315 | 3580-3960 | 305-335 | 3830-4200 | 31.8-35.0 | 4.0-4.4 |
| Y34 | 420-440 | 4200-4400 | 200-230 | 2510-2890 | 205-235 | 2570-2950 | 32.5-36.0 | 4.1-4.4 |
| Y35 | 430-450 | 4300-4500 | 215-239 | 2700-3000 | 217-241 | 2730-3030 | 33.1-38.2 | 4.1-4.8 |
| Y36 | 430-450 | 4300-4500 | 247-271 | 3100-3400 | 250-274 | 3140-3440 | 35.1-38.3 | 4.1-4.8 |
| Y38 | 440-460 | 4400-4600 | 285-305 | 3580-3830 | 294-310 | 3690-3890 | 36.6-40.6 | 4.6-4.8 |
| Y40 | 440-460 | 4400-4600 | 330-354 | 4150-4450 | 340-360 | 4270-4520 | 37.6-41.8 | 4.7-5.2 |
Introduction Of automobile wiper motor:
Permanent magnet ferrite plays a key role in automobile wiper motor. It is commonly used as an excitation source for a motor, helping the motor generate the desired torque by generating a constant magnetic field. This material has a high permeability and coercivity, making it particularly suitable as an auxiliary electromagnetic field source. Since the wiper motor needs to operate in a variety of harsh environmental conditions, the stability and durability of permanent magnet ferrite also makes it an ideal choice. Therefore, permanent magnet ferrite in automotive wiper motor can ensure the efficient operation of the motor and improve its reliability.
To know more about Xinheng Magnets